Industralight DTR100 Plaster Trimless LED Downlight
Industralight DTR100 is a cast aluminium LED luminaire with high quality integral LED light source. The fitting is designed to be fully set into the ceiling for an architectural trimless finish. The design results in a perfectly neat and seamless integration into the ceiling. Ideally suited for high quality interior projects.
Electrical Parameters
|
Driver Input Voltage |
200-240VAC |
|
Max Power Consumption |
12W |
|
LED Driver Classification |
Remote Mounted |
|
Light Source Classification |
Sharp COB LED |
Mechanical Specifications
|
IP Protection Rating |
IP20 |
|
Dimensions |
113x113mm |
|
Overall Depth |
154mm |
|
Installation Method |
Plaster-Set Trimless |
|
Construction Material |
Aluminium |
|
Standard Colour/Finish |
Black or White |
|
Recommended Operating Temp |
-15°C - 45°C |
Configuration Options
- Non standard colours available by special request
- Optional DALI dimmable LED driver available by request
Photometric Information
|
Typical Light Source Efficacy |
100lm/W |
|
CCT Colour Temperatures |
2700K / 3000K / 4000K / 5000K |
|
Colour Rendering Index [CRI] |
>90 |
|
Beam Angle / Viewing Angle |
24° |
Detailed photometric report and IES files available by request
Lighting Design & Simulations
Industralight can provide independent LUX calculations and 3D lighting simulations for your project incorporating this product. Please contact our office for more information on design services.
Dimming Compatibility
- Industralight DTR fittings are supplied with phase dimmable LED drivers
- Optional DALI LED driver available by request
- optional non-dimmable LED driver available by request
Ordering Information
|
Series Model Number |
DTR100 |
|
Specify Colour Temp |
2700K / 3000K / 4000K / 5000K |
|
Specify Beam Angle |
24° |
|
Specify Fixture Colour |
Black / White |
|
Warranty Information |
Extended Warranty Available |
All product specifications are subject to change without notice. Industralight assumes no responsibility of errors or omissions. Please confirm product details prior to ordering
